Garage Door Services & Repair

FAQ

Frequently Asked Questions

Garage doors have springs that hold them open and closed. These springs are often exposed to harsh weather conditions and may become damaged over time. Garage door springs should last at least 5-6 years before replacement is necessary.

Garage doors are heavy and cumbersome. If they fall down, they can cause serious damage to vehicles parked inside. Garage doors are prone to breakages due to their weight and size. Most garage doors have a spring mechanism that keeps them closed. When the spring breaks, the door falls open. However, if the spring is not properly fixed, the door may fall down even without any external force.

The first step in any garage door repair project is to determine whether you need to replace the entire unit or just the torsion spring. If the spring is worn out, then it should be replaced. However, if the rest of the unit is still working fine, then you may only need to replace the spring. Average cost of a Garage door torsion spring replacement is $140-$320.

  • Measure the width of the opening

Measure the distance between the two sides of the opening. You want to make sure that you have enough room to get your truck or car inside without hitting any obstacles. If you don’t have a tape measure, use a piece of string and tie it off at both ends.

  • Measure the height of the opening

This should be measured from the floor to the top of the door. Make sure that you take measurements from the center of the door.

  • Calculate the square footage

Multiply the width times the height to determine how much space you need.

  • Determine if you need a larger or smaller door

If you have a lot of stuff stored in your garage, you may want to consider getting a bigger door. However, if you only store a few things, you might not need a big door.

No, not really.

You’ll need to call a professional to install a new garage door spring. A garage door spring is a metal coil that connects the top of the door to the bottom hinge pin. Replacing a garage door spring is a simple DIY project, but it does require some basic tools and knowledge about how to work with them.

The average cost to replace a garage door spring is about $200-$300. If you have a garage door opener, you may need to pay for the replacement of the opener as well. Garage door springs are not cheap, but they do last a long time. You should expect to spend between $100-$150 per year on garage door maintenance.

The average lifespan of a garage door opener is about 10 years. Most openers have a battery backup system that keeps them running even if the power goes out. If you need to replace your opener, make sure to get one that is compatible with your current garage door opener. You may want to consider upgrading to a remote control opener if you don’t already have one. Remote controls allow you to open and close your garage door without having to physically go inside your house.

If the opener doesn’t work at all, it’s probably not worth fixing. You’ll just end up spending money on something else.

If the opener works intermittently, it could be due to a faulty switch or a loose connection. In these cases, it can be repaired and you’re going to need professional help to fix a garage door opener. A garage door opener repairman should know how to test the opener’s wiring and components, and he or she should be able to diagnose any problems.